O-Ring Sizes Charts Download

Ge Mao Rubber Industrial Co., Ltd.
Tel: +886-4-7810288 Fax: +886-4-7810289
rubber@ms.gmors.com.tw
No. 15, Kung Yeh East 4th Rd., Lukang, Chang Hua 505, Taiwan, R.O.C.
Hydraulic O-Ring

Hydraulic O-Ring

We manufacture every hydraulic seal and o-ring to the precise specifications of our customers.

Pneumatic O-Ring

Pneumatic Seal

Pneumatic seals including symmetrical seals, piston seals, rod seals, sealing gaskets, o-rings and more.

Heat Resistant O-Rings

Perfrez® 9001C

Perfluoroelastomers offer enhanced performance under the most demanding environments.

Chemical Resistant O-Ring

Perfrez® 9021C

A high performance grade of FFKM compound for use under extreme thermal and chemical conditions.

Rapid Gas Decompression O-Rings

Perfrez 9021A

A NORSOK M-710 certified ED resistant FFKM compound with exceptional resistance to rapid gas decompression.

Semi-Conductor O-Ring

Perfrez® 9021C

Semiconductor grade perfluoroelastomer for use where o-rings and seals are exposed to reactive plasma.

« 1 2 3»
O-Ring Factory Taiwan
O-Ring Factory China

O-Ring Sizes and Material Selection

Download Metric O-Ring Sizes and Standard Sizes Chart (PDF)

O-Ring Standard Size AS 568A, BS 4518, GB/T 3452.1, JIS B 2401, Metric, Swedish SMS 1586

Of the many kinds of sealing technology available in products manufacturing and machine design, the use of the o-ring is perhaps the most common and extensive. O-rings are used in appliances found in our homes as well as in heavy industrial machines like hydraulic cylinders and jacks. They are also typically found in many types of hand tools like pneumatic hammers, drills and air tools.

The selection of the right o-ring sizes is of critical importance and the sizes of o-rings are determined by its internal diameter as well as the diameter of its cross section area. The o-ring, when installed into the mount, should seat nicely and with strict tolerance within the recess of the mounting. The surface of the mounting that comes into direct contact with the o-ring should be even so that pressure on the o-ring is distributed evenly throughout. The o-ring, when compressed, should exert a pressure against the contact surface of the mounting of a value that is greater than the pressure of the fluid to be contained. This is essential for the proper sealing of the fluid and ensures that no leakage will occur. The selection of the o-ring should therefore be made with the design and shape or size of the mounting contact surface into consideration. The wrong size o-ring will result in sealing failure.

Environments where sealing components are subject to abuse include that of extreme temperatures conditions as well as exposure to corrosive chemical media. Elastomeric seals have to perform under the most demanding conditions, and failure would have implications in terms of equipment downtime, environmental consequences and safety of operation.


Copyright © 2017 Ge Mao Rubber Industrial Co., Ltd.